Warnings And Their Meaning; High-Frequency Emissions Of Wireless Sensors - oventrop R-Tronic RT B Installation And Operating Instructions Manual

Safety notes
2.3

Warnings and their meaning

This manual shows warnings for a safe installation and operation of the product,
especially at text passages with action-related information. These warnings must be
observed to avoid accidents, damage to property and malfunctions. The below
hazard classification is, amongst others, based on the ISO 3864 standard and the
international ANSI standard Z535.6.
DANGER
Warning symbol and signal are indicating a dangerous situation with high risk which
will lead to death or serious injury if not avoided.
WARNING
Warning symbol and signal are indicating a dangerous situation with moderate risk
which may lead to death or serious injury if not avoided.
CAUTION
Warning symbol and signal are indicating a dangerous situation with low risk which
may lead to minor or moderate injury or damage to property if not avoided.
NOTICE
Signal word (without warning symbol) indicating a possible damage to property.
2.4

High-frequency emissions of wireless sensors

Under normal conditions (use in residential areas), the use of this product does not
constitute a hazard to health. The high-frequency emissions of wireless switches
and sensors with wireless technology are much lower than the emissions of
conventional switches with also emit electromagnetic fields. Please observe that
special regulations and standards apply for the medical sector (e.g. hospitals).
The
"R-Tronic" with the actuator "Aktor MH/MD CON B" is not suitable for use in the
medical sector.
- 8 von 64 -