oventrop R-Tronic RT B Installation And Operating Instructions Manual page 30

Installation and initial operation
If you do not wish a constant heating or setback operation according to only one
temperature setting, the pre-defined heating profile PROFILE DAY / NIGHT can be
activated. The room temperature will be reduced to 17°C between 22.00 h and 6.00 h
and be adjusted to the "comfort temperature" of 20°C during the day.
1. Press the Auto/Manu-button until PROFILE DAY / NIGHT will be displayed.
► The "R-Tronic" will adjust the room temperature to 20°C during the day and to
17°C during the night. Switching is carried out at the above hours. The "R-Tronic"
display shows a line ("comfort phase") between the figures "6" and "22" below the
24-hour scale of the time line.
If the PROFILE DAY / NIGHT is activated, the operating mode display switches
from MANU to AUTO.
Chart showing the switching between day and night profile
NOTE regarding PROFILE DAY / NIGHT display
If an INDIVIDUAL PROFILE has been programmed and activated in the submenu
TIME PROFILE ► PROGRAMME SELECTION (see chapter 5, page 29), the last
activated INDIVIDUAL PROFILE (1-5) will be displayed when pressing the
Auto/Manu-button.
- 30 von 64 -
(Illustr. 26)