Operation With Table Stand And Mains Adaptor - oventrop i-Tronic TFC Installation And Operating Instructions Manual

Climate meter with integrated temperature, air humidity and co2 sensor

Table of Contents

Available languages

Installation and initial operation

3.2

Operation with table stand and mains adaptor

The climate meter "i-Tronic TFC" should be installed at a location where a

good circulation of air is guaranteed. The table stand should be set up free-

standing, for instance on tables, sideboards or similar.

NOTE

Please make sure that the climate meter which is equipped with several sen-

sors, is not affected by other heat sources (such as direct sunlight or heating

devices next to it) as otherwise the measuring results may be distorted.

Plug the mains adapter which is connected to the table stand into an

earthed socket (100-240 V ~/50-60 Hz).

Insert the "i-Tronic TFC" into the table stand from the top.

„i-Tronic TFC"

Table stand

The power supply is connected and the "i-Tronic TFC" is ready for use.

NOTE

The "i-Tronic TFC" is removed by pulling it vertically upward out of the table

stand.

„i-Tronic TFC"

Mains adaptor

Table of Contents

Table of Contents