Standard Heating Profiles And Temperature Setting; Switching Between Different Heating Profiles - oventrop R-Tronic RT B Installation And Operating Instructions Manual

Installation and initial operation
4.9

Standard heating profiles and temperature setting

When putting the "R-Tronic" into operation, the standard profile will always be active
and adjust the room temperature to a constant value of 20°C (continuous heating
operation = PROFILE ON). The activity of the standard profile is displayed by a
continuous line below the timeline across the complete 24-hour scale (MANU will be
displayed):
This basic setting can be adjusted according to your requirements or be inactivated
within a few steps via the Auto/Manu-button.

4.9.1 Switching between different heating profiles

For the sake of energy saving it might be useful to switch the standard setting from
PROFILE ON to PROFILE OFF. As a result, the "R-Tronic" will reduce the constant
room temperature from 20°C to 17°C. This modification should be carried out if the
room does not need to be heated continuously or if it is temporarily unoccupied.
1. Press the Auto/Manu-button until PROFILE OFF appears on the display.
► The "R-Tronic" will reduce the temperature to a constant value of 17 °C and
the continuous line below the timeline will no longer be displayed.
(constant setback temperature).
The operating mode MANU remains displayed.
- 29 von 64 -
(Illustr. 25)
Auto/Manu-button