Menu "Settings; Installation (Radio Communication "R-Tronic" / "Aktor Mh/Md Con B") - oventrop R-Tronic RT B Installation And Operating Instructions Manual

Operation
5.4

Menu "Settings"

Menu structure:
MAIN MENU
TIME PROFILE
TEMPERATURES
Connection of the "R-Tronic" to the radio controlled actuator (respectively up to 8
radiators) is carried out via the submenu SETTINGS and global specifications for the
operation of your device are made via this menu.

5.4.1 Installation (radio communication "R-Tronic" / "Aktor MH/MD CON B")

This function has already been mentioned in chapter 4, paragraph 6. The radio
communication between the climate controller "R-Tronic" and the actuator "Aktor MH
CON B" respectively "Aktor MD CON B" is created via this setting routine. The TEACH
IN process is described on the pages 20 to 23 of this manual.
The radio communication can be interrupted (e.g. for removing the actuator from the
radiator) via the command TEACH OUT. "Teaching out" is only possible if at least one
actuator has been "teached in" before. This is signalized by the radio signal on the "R-
Tronic" display:
The actuator can be "teached out" as follows:
1. Go to the MAIN MENU. After having pressed the menu-button, you will reach the
submenu TIME PROFILE again. Turn the menu-button to the right and confirm
the selection SETTINGS as well as the following selection INSTALLATION.
TEACH IN will appear in the text line of the display.
FUNCTIONS
INSTALLATION
DATE / TIME
LANGUAGE
SUMMER-/ WINTER TIME
ROOM DESIGNATION
FACTORY SETTING
- 44 von 64 -
SETTINGS INFORMATION
DISPLAY
CONTROL
LIGHTING
RESET
(Illustr. 46)
...
...
...
...
...
...
...
...
...
...