Setting Of The General Temperature Range - oventrop R-Tronic RT B Installation And Operating Instructions Manual

5.2.1 Setting of the general temperature range

The submenu TEMPERATURES offers the option to define a general temperature
range for all heating and setback periods and their respective cycles. The "R-Tronic" is
preset at works to a maximum range between 6 °C and 35 °C. You can change these
values via the function TEMPERATURES ► LIMIT MIN/MAX.
The new temperature limits are set as follows:
1. You are in the submenu TEMPERATURES. Turn the menu-button to the right
until LIMIT MIX/MAX will be displayed and confirm the selection by pressing the
button.
2. Define the new lower temperature limit (LIMIT MIN) and confirm your entry by
pressing the menu-button.
The message SAVED will be displayed shortly and the display will return to the
selection menu LIMIT MIN/MAX.
3. To define the upper temperature limit, turn the menu-button slightly to the right
and confirm the selection LIMIT MAX. Enter the new value as described before.
► The new general temperature limits of the "R-Tronic" are set now. Leave the
submenu and return to the default view by keeping the return-button pressed for
3 seconds.
NOTE
Please observe that the programmed individual profiles will be influenced by the new
general temperature limits. Should the individual profile settings lie outside the new
defined temperature range, they will automatically be reduced to the new limits.
Example:
A setback temperature of 12°C was programmed for a cellar in the individual profile.
The lower temperature range (for this room) was subsequently increased to 14°C. The
setback temperature of your individual profile will automatically be increased to 14°C
and the room temperature will not drop below this value.
- 39 von 64 -
Operation
(Illustr. 41)