Wall Attachment Of The Fixing Plate Of The "R-Tronic" With Wall Bracket (Battery Operation) - oventrop R-Tronic RTF B Operating Instructions Manual

R-Tronic
by external sources of heat (e.g. sunlight or nearby heating devices).
This is the only way to achieve a high degree of measuring accuracy.
As an alternative to wall attachment, you can operate the wireless
thermostat using a table stand (available optionally as an accessory).
The table stand should be self-supporting, e.g. placed upright on a
table and uncovered.
Ensure that the radio range cannot be adversely affected by spatial
factors such as the room geometry or objects, materials and inter-
ference sources. Such factors may produce a "radio shadow", e.g.
behind metal objects.
6.2 Wall attachment of the fixing plate of the "R-Tronic" with wall
bracket (battery operation)
Power is supplied via batteries as standard. A flush-mounted power pack
and a table stand with mains adaptor are available as accessories.
1. Insert two 1.5 V AA batteries into the unit. The +/- markings indicate the
position in which the batteries should be inserted.
2. Horizontally screw the fixing plate for the wireless thermostat (included
in the delivery) to the wall.
Illustr. 4: Wall attachment of the fixing plate
3. Insert the wireless thermostat into the fixing plate from above.
f "R-Tronic" is now ready for the "teach in" process (refer to 7.5 on page
34).
115078080-V01.10.2019
Installation
31