Current Transformers (Cts) - Omron E5 C Series Manual

Optional Products (Order Separately)
USB-Serial Conversion Cable
Model
E58-CIFQ2
Communications Conversion Cable
Model
E58-CIFQ2-E
Note: Always use this product together with the E58-CIFQ2.
This Cable is used to connect to the front-panel Setup Tool
port.
Terminal Covers (for E5EC/E5AC)
Model
E53-COV24 (3pcs)
Note: The Terminal Covers E53-COV24 are provided with the Digital
Temperature Controller.
Waterproof Packing
Applicable Controller
E5EC/E5EC-B
E5AC
Note: This Waterproof Packing is provided with the Digital
Temperature Controller.
Waterproof Cover
Applicable Controller
E5EC/E5EC-B
E5AC
Front Port Cover
Model
Y92S-P7
Note: This Front Port Cover is provided with the Digital Temperature
Controller.
Mounting Adapter
Model
Y92F-51 (2pcs)
Note: This Mounting Adapter is provided with the Digital Temperature
Controller.
Model
Y92S-P9
Y92S-P10
Model
Y92A-49N
Y92A-96N
E5EC/E5EC-B/E5AC

Current Transformers (CTs)

Hole diameter
5.8 mm E54-CT1
E54-CT1L *
5.8 mm
12.0 mm E54-CT3
E54-CT3L *
12.0 mm
* Lead wires are included with these CTs. If UL certification is
required, use these CTs.
CX-Thermo Support Software
Model
EST2-2C-MV4
Note: CX-Thermo version 4.5 or higher is required for the E5EC/
E5AC.
CX-Thermo version 4.65 or higher is required for the E5EC-B.
CX-Thermo version 4.67 or higher is required for the E5CC-B
linear current output type.
For the system requirements for the CX-Thermo, refer to
information on the EST2-2C-MV4 on the OMRON website
(www.ia.omron.com).
Model
43