Waterproof Packing
Y92S-P8 (for DIN 48 × 48)
Current Transformers
E54-CT1
25
E54-CT1L
8
115±5
25
The Waterproof Packing is provided only with the E5CC/E5CC-B.
It is not included with the E5CC-U.
Order the Waterproof Packing separately if it becomes lost or damaged.
The Waterproof Packing can be used to achieve an IP66 degree of protection.
(Deterioration, shrinking, or hardening of the waterproof packing may occur depending on the
operating environment. Therefore, periodic replacement is recommended to ensure the level of
waterproofing specified in IP66. The time for periodic replacement depends on the operating
environment. Be sure to confirm this point at your site.
Consider three years as a rough standard.)
The E5CC-U cannot be waterproofed even if the Waterproof Packing is attached.
21
2.8
Filler
15
5.8 dia.
(epoxy)
Case
2.5
10.5
40
10
5
Two, 3.5 dia.
30
21
15
Cable (AWG18)
(12)
Shrinkable tube
Case (PBT)
5.8 dia.
Filler (epoxy)
2.5
10.5
40
5
Two, 3.5 dia.
30
Thru-current (Io) vs. Output Voltage (Eo)
(Reference Values)
E54-CT1 or E54-CT1L
7.5
Maximum continuous heater current: 50 A (50/60 Hz)
Number of windings:
Winding resistance:
100mV
100μV
Mark (yellow)
10
E5CC/E5CC-B/E5CC-U
400
18
100V
Frequency: 50 Hz
∞
10
1kΩ
1
1%
100Ω
10
R
=10Ω
1
L
10
1
10
100mA
1
10
Thru-current (Io) A (r.m.s.)
±
2
±
Ω
2
Distortion
factor
10%
3%
100 1,000A
35
Need help?
Do you have a question about the E5 C Series and is the answer not in the manual?