Omron E5 C Series Manual page 4

E5GC
Optional Products (Order Separately)
USB-Serial Conversion Cable
Model
E58-CIFQ2
Communications Conversion Cable
Model
E58-CIFQ2-E
Note: Always use this product together with the E58-CIFQ2.
This Cable is used to connect to the bottom-panel Setup Tool
port.
Current Transformers (CTs)
Hole diameter
5.8 mm E54-CT1
5.8 mm E54-CT1L*
12.0 mm E54-CT3
12.0 mm E54-CT3L*
*Lead wires are included with these CTs. If UL certification is required, use
these CTs.
Mounting Adapter
Model
Y92F-53 (2pcs)
Note: This Mounting Adapter is provided with the Digital Temperature
Controller.
4
Model
Waterproof Packing
Model
Y92S-P12
Note: This Waterproof Packing is provided with the Digital
Temperature Controller.
Draw-out Jig
Model
Y92F-55
CX-Thermo Support Software
Model
EST2-2C-MV4
Note: CX-Thermo version 4.62 or higher is required for the E5GC.
For the system requirements for the CX-Thermo, refer to
information on the EST2-2C-MV4 on the OMRON website
(www.ia.omron.com).
Terminal Covers (for E5GC-@6)
Model
E53-COV27
Note: This Terminal Covers is provided with the Digital Temperature
Controller.