Terminal Covers - Omron E5 C Series Manual

E5CC/E5CC-B/E5CC-U
E5CC-U
Accessories (Order Separately)
USB-Serial Conversion Cable
E58-CIFQ2

Terminal Covers

E53-COV17
Terminal Cover (for the P3GA-11 Back-connecting Socket)
Y92A-48G
34
34
76.8
4
58.6
48 × 48
Mounting Adapter
(Accessory, Y92F-49 (also available for ordering separately))
The Setup Tool port is on the top of the Temperature Controller.
It is used to connect the Temperature Controller to the computer to use the Setup Tool.
The E58-CIFQ2 USB-Serial Conversion Cable is required to make the connection.
Refer to the instructions that are provided with the USB-Serial Conversion Cable for the connection procedure.
Note: Do not leave the USB-Serial Conversion Cable connected when you use the Temperature Controller.
Panel Cutout
Mounted Separately
60 min.
+0.6
45
0
+0.6
45
0
250
USB connector
(type A plug)
48
48.8
22
9.1
Twelve, 6.4-dia.
47.7×47.7
Y92A-48G UP
P C
16.5
24.6
27.6
47.4
14.2
44.8 × 44.8
58
Group Mounted
+1.0
(48 × number of units - 2.5)
0
• Recommended panel thickness is 1 to 5 mm.
+0.6
45
• Group mounting is not possible in the vertical direction. (Maintain
0
the specified mounting space between Controllers.)
• When two or more Controllers are mounted, make sure that the
surrounding temperature does not exceed the allowable operating
temperature specified in the specifications.
• Use a control panel thickness of 1 to 3 mm if the Y92A-48N and a
USB-Serial Conversion Cable are used together.
(2110)
LED (RD)
LED (PWR)
LED (SD)
Terminal Covers
E53-COV23 (Three Covers provided.)
44.8
48×48
Note: You can attach the P3GA-11 Back-connecting Socket for finger protection.
263 1510
2 3.8
10
Terminal Cover
(E53-COV23)
Serial connector