Hypertherm HyPrecision Predictive P-15 Operator's Manual page 55

4 – Operation
This waterjet equipment could make more noise than is permitted by national or local codes.
When this intensifier is operating, the noise level is 75 dB(A) to 80 dB(A). Water flow rate, pipe
layout, and the acoustical characteristics of the building have an effect on noise level.
Long periods of exposure to noise can cause permanent hearing loss. Wear approved ear
protection and control exposure time when operating or doing work near this equipment.
CAUTION
High-pressure water can cause cuts, abrasions, and punctures.
Precision parts can have sharp corners or edges.
Wear approved hand protection when operating or doing work near this equipment and when
touching parts.
CAUTION
Some materials can cause airborne contamination or particles when cut. Wear approved
respiratory protection when operating or doing work near this equipment.
CAUTION
Obey all safety requirements and applicable safety laws and regulations.
Keep the work area clean and dry. Clean fluid spills immediately. Use catch basins under areas
where water or hydraulic fluid can spill during maintenance or repair procedures.
HyPrecision Predictive waterjet pump Operator Manual 810120 55