Do A Preoperation Inspection; Turn On The Utilities - Hypertherm HyPrecision Predictive P-15 Operator's Manual

4 – Operation

Do a preoperation inspection

WARNING
 Look for leaks, deterioration, damage, or other conditions that can interfere with operation.
 Look at the sight gauge on the hydraulic fluid tank. Add hydraulic fluid, if necessary.
 Close all doors and replace all panels and covers, including access covers.

Make sure that all warning decals are visible and legible.

Turn on the utilities

1. Turn the electrical breaker.
ON
2. Turn the water to the pump.
ON
3. Monitor for leaks.
4. Turn the compressed air supply.
ON
5. Turn the electrical main.
ON
6. Turn the primary breaker disconnect lever on the electrical enclosure door to
The operator interface screen is on when the pump is energized.
56
Make sure that all connections, fasteners, locking devices, hoses, and fittings are tight.
HyPrecision Predictive waterjet pump Operator Manual 810120
.
ON