Safety - Hypertherm HyPrecision Predictive P-15 Operator's Manual

4 – Operation

Safety

DANGER
DANGER
DANGER
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
CAUTION
CAUTION
54
Refer to the instruction manual. Read and understand all of the safety guidelines in this manual.
A waterjet is a cutting tool. Keep away from high-pressure streams and leaks. Pressurized fluid
can cause injuries.
A high-pressure injection injury is a surgical emergency. Get medical treatment immediately for all
high-pressure waterjet injuries.
Delayed treatment can cause injuries or death. Abrasive waterjets eject a mixture of water and
abrasive materials that can be injected into body tissues, leading to a dangerous infection.
D /
ANGEROUS VOLTAGE RISK OF SHOCK
To reduce the risk of injuries or death, wear approved protection and obey safety
recommendations when doing work with electricity.
Do not stand in line with high-pressure fittings when operating this equipment. If a high-pressure
fitting fails, it can cause a stream of water or hydraulic fluid to eject from the system with force.
Keep a restricted-access area clear that larger than the maximum movement range of the cutting
equipment's moving parts.
Personal protective equipment is recommended. If you do not use personal protective equipment,
there is a risk of injury or death.
Permit only approved personnel to operate, maintain, and repair this machinery.
Do not leave waterjet cutting equipment unattended while it is operating.
Do not operate the pump without the shaft access cover and all other safety devices correctly
installed.
Make sure that all connections, fasteners, locking devices, hoses, and fittings are tight before
operation.
Do not block or remove warnings, cautions, or instructions.
Do not touch a hot surface.
Water leaking from a high-pressure fitting or the bleed-down valve can be hot.
High-pressure water can cause eye injuries. Wear approved eye protection when operating or
doing work near this equipment.
HyPrecision Predictive waterjet pump Operator Manual 810120