Remote Operation; Storage - Hypertherm HyPrecision Predictive P-15 Operator's Manual

9 – Installation
If the microSD card is missing or damaged, this screen shows SD Card Not Found.

Remote operation

To connect the pump directly to an external control device, such as a CNC, refer to the CNC manual and contact
a Hypertherm Technical Service Associate for information and support.
The electrical interlock is part of the emergency stop circuit. If the top cover is opened while the pump is on, the
result is the same as pushing the EMERGENCY STOP button.

Storage

Refer to on page 135 for information about storing this equipment.
Prepare for storage
226 HyPrecision Predictive waterjet pump Operator Manual 810120