Primary Maintenance Screen - Hypertherm HyPrecision Predictive P-15 Operator's Manual

5 – Preventive maintenance

Primary maintenance screen

On the operator interface, touch the maintenance symbol to open the primary maintenance screen.
1 Move the plunger
2 Start the pump after maintenance
3 Prepare for storage
Move the plunger
Touch this symbol to open the Move the Plunger screen.
Touch a symbol to manually shift the intensifier plunger to the left or to the right.

The unit must be in cooling mode. The cooling symbol with a hand flashes as a reminder.
Start the pump after maintenance
Touch this symbol to open the Start Procedure screen. Refer to Postmaintenance start procedure
on page 132 for instructions.
128
1
2
3
HyPrecision Predictive waterjet pump Operator Manual 810120
4
5
6
4 Record maintenance
5 Inputs and outputs
6 Alarm log