Printing can be performed for a while even if the waste toner container is not replaced immediately. The number of prints that can be printed depends on the printed

content. However, if printing is continued, an error will occur and printing can no longer be performed. The Waste Toner Container is located in the following

location of the overall view.

Caution]

- Do not burn or throw used Waste Toner Containers into open flames. Also, do not store Waste Toner Containers in places exposed to open flames, as this may

cause the toner to ignite, resulting in burns or a fire.

- If toner is accidentally spilled or scattered, carefully gather the toner particles together or wipe them up with a soft, damp cloth in a way that prevents inhalation.

Never use a vacuum cleaner that does not have safeguards against dust explosions to clean up spilled toner. Doing so may cause a malfunction in the vacuum cleaner,

or result in a dust explosion due to static discharge.

- If toner is accidentally ingested, consult a physician immediately.

- If toner gets onto hands or clothing, wash it off immediately with cold water. Washing it off with warm water will set the toner, and make it impossible to remove

the toner stains.

[Reference]

- The local authorized Canon dealer will dispose of used Waste Toner Containers.

- Used toner cannot be reused. Do not mix new and used toner together.

- Use only Waste Toner Containers intended for use with this machine.

- Refer to "Consumables" for the genuine Canon Waste Toner Container for this machine.

- Do not replace the Waste Toner Container before the message prompting you to replace it appears on the touch panel display.

- When attaching the Waste Toner Container, make sure to push it in all the way.

- Complete instructions on how to replace the toner cartridge can be accessed by pressing [Previous] or [Next] on the touch panel display.

- If the Waste Toner Container must be replaced during a print job, the remaining prints are made after the new Waste Toner Container is installed.

Replacement steps for the Waste Toner Container are as follows.

1-149