Canon imagePRESS C800 Series Troubleshooting Manual page 149

Description
Please explain the actions to take after replacing the Fixing Assembly.
Field Remedy
1) Apply grease (SE1107) to the tooth surface [B] of the gear [1] of the Fixing Drive Unit.
- Range/amount of grease to apply: Amount of grease to cover grease-applicable area on the gear teeth surface
2) Install the removed parts in reverse order.
3) Clear the counter.
- Service Mode > COPIER > Counter > Fixing > FX-CNT (Fixing Assembly Feed Counter)
- Service Mode > COPIER > Counter > DRBL-1 > FX-BLT-U (Fixing Belt Unit Parts Counter)
- Service Mode > COPIER > Counter > DRBL-1 > FX-BLT-L (Pressure Belt Unit Parts Counter)
[Reference] The following items are cleared when the above counters are cleared.
Service Mode > COPIER > Display > FIXING > FX-U-TM1
Service Mode > COPIER > Display > FIXING > FX-U-TM2
Service Mode > COPIER > Display > FIXING > FX-U-TM3
Service Mode > COPIER > Display > FIXING > FX-U-TM4
Service Mode > COPIER > Display > FIXING > FX-U-TM5
Service Mode > COPIER > Display > FIXING > FX-L-TM1
Service Mode > COPIER > Display > FIXING > FX-L-TM2
Service Mode > COPIER > Display > FIXING > FX-L-TM3
Service Mode > COPIER > Display > FIXING > FX-L-TM4
Service Mode > COPIER > Display > FIXING > FX-L-TM5
Service Mode > COPIER > Display > FIXING > FX-U-STR
Service Mode > COPIER > Display > FIXING > FX-MTR2
Service Mode > COPIER > Display > FIXING > FX-MTR3
Service Mode > COPIER > Display > FIXING > FX-MTR4
Display Fix Belt Unit STBY total run time
Display Fix Belt Unit running time: 321mm/s
Display Fix Belt Unit running time: 280mm/s
Display Fix Belt Unit running time: 160mm/s
Display Fix Belt Unit running time: 140mm/s
Display Press Belt Unit STBY total run time
Display of Press Belt Unit running time: 1/1 SPEED
Display of Press Belt Unit running time: 2/3 SPEED
Display of Press Belt Unit running time: 1/2 SPEED
Display of Press Belt Unit running time: standby
Display Fixing Belt displacement control steering set VL log
Display Fixing Motor current VL log: 1/1 SPEED
Display Fixing Motor current VL log: 2/3 SPEED
Display Fixing Motor current VL log: 1/2 SPEED
Chapter 1
1-135