Canon imagePRESS C800 Series Troubleshooting Manual page 243

Chapter 1
5) Double-click [Internet Protocol (TCP/IP)]/[Internet Protocol Version 4 (TCP/IPv4)].
6) In the [Internet Protocol (TCP/IP) Properties]/[Internet Protocol Version 4 (TCP/IPv4) Properties] dialog box, click [Advanced] on the [General] sheet > click
the [WINS] tab.
7) On the [WINS] sheet, select [Enable NetBIOS over TCP/IP].
8) Click [OK] repeatedly to close the dialog box.
9) Restart the computer if prompted.
10) Confirm the computer name.
- For Windows Vista/Server 2008:
From the [Start] menu, right-click [Computer] > select [Properties] > click [Change settings] for <Computer name, domain, and workgroup settings>.
In the [System Properties] dialog box, on the [Computer Name] sheet, click [Change].
In the [Computer Name/Domain Changes] dialog box, click [More].
Confirm [NetBIOS computer name] in the dialog box that appears.
Click [Cancel] repeatedly to close the dialog box.
- For Windows 7/Server 2008 R2:
From the [Start] menu, right-click [Computer] > select [Properties] > click [Change settings] for <Computer name, domain, and workgroup settings>.
1-229