Canon imagePRESS C800 Series Troubleshooting Manual page 26

Chapter 1
3) Enter a name for the duplicated paper type and press "OK" button.
4) Select the paper type duplicated in the step 3) and press "Details/Edit".
5) Select "Adjust Gloss/Fine Black" and press "Change".
[Note] In case "Adjust Gloss/Fine Black" is not displayed on the control panel, change the setting value of Service Mode > Mode List > COPIER > Option > DSP-
LY-SW > IMGC-ADJ to "1" and perform a power-cycle of main power (off/on). The value is "0" by default.
1-12