Points To Note When Replacing Potential Sensor/Potential Control Pcb - Canon imagePRESS C800 Series Troubleshooting Manual

Chapter 1

1.1.7.1.65 Points to note when replacing Potential Sensor/Potential Control PCB

0031-6464
[ Manual-related ]
Description
Please explain the actions to take when replacing the Potential Sensor/Potential Control PCB.
Field Remedy
[Reference] When replacing the Potential Sensor, replace the Potential Control PCB Unit (including the Potential Sensor, harness and Potential Control PCB).
1) Install the Primary Charging Rail [1] with its Potential Sensor removed.
- 1 Screw [2]
1-169