Canon imagePRESS C800 Series Troubleshooting Manual page 189

Chapter 1
Description
Please explain the actions to take after replacing the Fixing Belt Unit.
Field Remedy
1) Apply grease (SE1107) to the tooth surfaces [A] of the 4 gears [1] of the Pressure Belt Unit.
- Range/amount of grease to apply: Amount of grease to cover grease-applicable area on the gear teeth surface
2) Apply grease (SE1107) to the tooth surface [B] of the gear [2] of the Fixing Drive Unit.
- Range/amount of grease to apply: Amount of grease to cover grease-applicable area on the gear teeth surface
3) Clean the surface [A] of the Fixing Inlet Guide with lint-free paper [1] moistened with alcohol.
1-175