Netware Network Setup Procedures - Canon iR3245 Network Manual

NetWare Network Setup Procedures

To use a NetWare network, it is necessary to perform the following procedures.
4
1 NetWare Print Service Settings (See " NetWare Print Service Settings (p.4-4) .")
Specify the NetWare print service settings. (Optional equipment is required to print or send a fax from
a computer. For the equipment needed, see "Optional Equipment and System Requirements(p.1-2).")
To specify the settings from the computer, use:
NWADMIN or PCONSOLE (Novell software provided with NetWare)
Canon utilities (NetSpot Device Installer, etc.)
2 Protocol Settings (See " Protocol Settings (p.4-12) .")
Specify the protocol settings. To specify the settings, use:
The machine's control panel
The Remote UI (via a web browser)
Canon utilities (NetSpot Device Installer, etc.)
3 Computer Settings for Printing/Sending a Fax (See " Setting Up a Computer
for Printing/Sending a Fax (p.4-17) .")
Specify the settings of each computer you use for printing or sending a fax. (Optional equipment is
required to print or send a fax from a computer. For the equipment needed, see "Optional Equipment
and System Requirements(p.1-2).")
4-2 NetWare Network Setup Procedures