Canon iR3245 Network Manual page 42

On
Off
2
Off
If you want to use a Canon printer driver or utility, press [On] for both <Use SNMP v. 1> and [Enable
Dedicated Port].
You can restrict the IP addresses of computers on which items can be set or browsed. If you restrict the IP
addresses, it is not possible to set or browse detailed information concerning the machine on computers
other than those whose IP addresses are allowed, even if <Use SNMP v. 1>, <Use SNMP v. 3>, and [Enable
Dedicated Port] are 'On'. For details, see "TCP/IPv4 Settings(p.3-4)," or "TCP/IPv6 Settings(p.3-13)."
If you want to specify a Community Name 1
●
If you want to specify a Community Name 2
●
If you want to specify a Community Name 1
Press [Community Name 1 Settings] → [On] → specify the settings for <MIB
Access Permission> and the community name in [Community Name].
You can also change the community name in [Community Name] to a name other than
'public'.
2-14 Communication Environment Setup
Read Only Off
On
-
Off
-
You can only browse each item of the machine with a
utility that uses SNMP v. 1 to obtain information.
Only users who have been assigned access rights can set
or browse each item of the machine with a utility that uses
SNMP v. 3.
You cannot set or browse each item of the machine with a
utility.