Canon iR3245 Network Manual page 81

iR3235/iR3225 with the optional UFR II Printer Kit, the optional UFR II/PCL Printer Kit, the
optional PS Printer Kit, or the optional Super G3 FAX Board.
[On]: You can use IPP as the print application. Pressing [On] for [IPP Print Settings]
automatically sets [Use HTTP] to 'On'.
To use SSL to encrypt the IPP data, press [On] for <Use SSL>.
If you are using IPP authentication, press [On] for <Use Authentication> → enter the user
name to use for IPP authentication in [User], and the password to use for IPP authentication
in [Password].
In order to select [On] for <Use SSL> to allow SSL communication, a key pair is necessary. You can use
the preinstalled key pair, or generate an original key pair with the machine, to set as the default key. For
information on the default key, and instructions on how to generate an original key pair, see "Generating a
Key Pair and Server Certificate(p.3-38)."
8. On the TCP/IP Settings screen, press [Multicast Discovery] → specify
the following.
[On] for <Response>: You can use device information from other devices, such as an
Address Book or Department ID Management settings, or respond to a multicast discovery
from utilities.
Optionally, press [Scope Name] and enter the scope name for a multicast discovery.
For instructions on how to deliver and share device information, such as the Address Book and
Department ID Management settings with multiple devices, see the Reference Guide.
Settings Common to TCP/IPv4 and TCP/IPv6
3
3-29