Netware Network Setup Operating Procedures - Canon iR 3250 Network Manual

NetWare Network Setup Operating Procedures

The following operating procedures are necessary to use the machine on a NetWare network. See
the pages listed for each item when entering the necessary settings.
Printing Settings
The following settings are necessary to print from the machine.
IMPORTANT
• It is recommended that a network manger enters the NetWare print service and protocol settings.
1
NetWare Print Service Settings
NetWare print service settings can be made from the NetWare Administrator or
PCONSOLE.
(See "NetWare Print Service Settings," on p. 3-4.)
2
Protocol Settings
Protocol settings can be entered from the control panel or from NetSpot. Use whichever is
more convenient.
(See "Settings from the Control Panel," on p. 3-9.)
NOTE
• For instructions on entering settings with NetSpot, See "Using the Network and Printer Settings with
NetSpot," in Chapter 5.
• If you are able to use the TCP/IP protocol, you can enter settings using the Remote UI. (The
Remote UI enables you to enter a variety of settings for the machine from a computer with a web
browser.) For instructions on using the Remote UI, see the Remote UI User's Guide.
3
Computer Settings
Enter settings for the computer you are printing from. (See "Setting Up a Computer for
Printing," on p. 3-12.)
3-2 NetWare Network Setup Operating Procedures