Appletalk Network Setup Procedures - Canon iR3245 Network Manual

AppleTalk Network Setup Procedures

To print via an AppleTalk network, it is necessary to perform the following procedures.
1 Macintosh Network Settings
To specify AppleTalk network settings, enable AppleTalk according to the instructions in the
documentation provided with your Macintosh.
6
2 Protocol Settings (See " Protocol Settings (p.6-3) .")
Specify the protocol settings. To specify the settings, use:
The machine's control panel
The Remote UI (via a web browser)
Canon utilities (NetSpot Device Installer, etc.)
3 Macintosh Print Settings (See " Setting Up a Computer for Printing (p.6-5) .")
Specify the settings for each computer you use for printing.
Remark
You can only specify the AppleTalk protocol settings if
you are using the iR3245N/iR3235N/iR3225N, or the
iR3245/iR3235/iR3225 with the optional UFR II Printer
Kit, the optional UFR II/PCL Printer Kit, or the optional
PS Printer Kit.
Depending on the machine you are using, you may have
to use optional equipment to print via an AppleTalk
network. For the equipment needed, see "Optional
Equipment and System Requirements(p.1-2)."
6-2 AppleTalk Network Setup Procedures
It is recommended that the network administrator
perform step 2.