Canon iR3245 Network Manual page 114

5. On the Selector Settings screen, specify the remote IP address to apply
the registered security policy to.
When receiving IP packets, the registered security policy is applied if the source IP address
in the packets matches the remote IP address specified in this procedure. When sending IP
packets, the registered security policy is applied if the destination IP address in the packets
3
matches the remote IP address specified in this procedure.
Applying a Security Policy to All Sent and Received IP Packets:
●
Applying a Security Policy to the IP Packets Received from and Sent to All IPv4 Addresses
●
Held By the Machine:
Applying a Security Policy to the IP Packets Received from and Sent to All IPv6 Addresses
●
Held By the Machine:
Applying a Security Policy to the IP Packets Received from and Sent to the Specified IPv4
●
Address or IPv4 Network Address:
Applying a Security Policy to the IP Packets Received from and Sent to the Specified IPv6
●
Address or IPv6 Network Address:
Applying a Security Policy to All Sent and Received IP Packets:
Select [All IP addresses] for <Remote Address>.
Applying a Security Policy to the IP Packets Received from and Sent to All
IPv4 Addresses Held By the Machine:
Select [All IPv4 addresses] for <Remote Address>.
Applying a Security Policy to the IP Packets Received from and Sent to All
IPv6 Addresses Held By the Machine:
3-62 Registering a Security Policy