Registering A Security Policy - Canon iR3245 Network Manual

Registering a Security Policy

This section describes the procedure for registering a new security policy.
3
Remarks
You can register up to 10 security policies. The
registered security policies are displayed in order of
their priority.
1. On the TCP/IP Settings screen, press [IPSec Settings] → select [On] for
<Use IPSec>.
If you set <Use IPv4> to 'On', the machine will not enter the Sleep mode completely.
2. In <Receive Non-policy Packets>, specify the following settings → press
[Register].
[Allow]: Allows the sending/receiving of packets that are not encrypted because they do not
correspond to the security policy set on the IPSec Settings screen, in plain text.
[Reject]: Rejects the sending/receiving of packets that do not correspond to the security
policy set on the IPSec Settings screen.
3-58 Registering a Security Policy