Canon iR3245 Network Manual page 157

[Folder Path]:
[User]:
[Password]:
For a sample screen, see the example of Windows 2000/XP/Server 2003/Vista screen.
To use the host name of the above example for [Host Name], it is necessary to use a DNS server. (This
applies even if the machine and the FTP server are in the same subnet.) If no DNS server is available, the
host name setting should be specified using the IP address of the FTP server.
Up to 128 alphanumeric characters can be entered for [Host Name] on the control panel. Also, up to 255
alphanumeric characters can be entered for [Folder Path].
If you switch the language of the touch panel display, [Host Name] and [Folder Path] may not be displayed
correctly.
If you want to send to an IPv4 host using an FTP port other than port 21, set [Host Name] using the
following format:
<IPv4 address of FTP server>:<Port number>
Example: 192.168.1.21:21000
To send to an IPv6 host, set [Host Name] using the following format:
<IPv6 address>:<Port number>
Example: [5aed:90a0:bc05:01d2:568a:2fc0:0001:12ee]:21000
Enter one of the following:
share (when using relative
path)
/home/hsato/share (when
using absolute path)
User name entered in step 1
Password for the above user
UNIX/Linux 3-105
3