If you want to use a Canon printer driver or utility, press [On] for both <Use SNMP v. 1> and [Enable
Dedicated Port].
You can restrict the IP addresses of computers on which items can be set or browsed. If you restrict the IP
addresses, it is not possible to set or browse detailed information concerning the machine on computers
other than those whose IP addresses are allowed, even if <Use SNMP v. 1>, <Use SNMP v. 3>, and [Enable
Dedicated Port] are 'On'. For details, see "TCP/IPv4 Settings(p.3-4)," or "TCP/IPv6 Settings(p.3-13)."
5. On the Network Settings screen, press [Use Spooler] → specify the
following.
[On]: You can spool print jobs transmitted to this machine on the machine's hard disk. Set
the spooler if you are using the iR3245N/iR3235N/iR3225N, or the iR3245/iR3235/iR3225
with the optional UFR II Printer Kit, the optional UFR II/PCL Printer Kit, the optional PS
Printer Kit, or the optional Super G3 FAX Board.
If the optional PS Printer Kit is activated, take note of the following:
If the print job is sent from a Macintosh computer to a PS printer, you cannot specify whether to spool
under this option. Spooling is determined by the name of the printer selected in theMacintosh screen.
For more information, see "Setting Up a Computer for Printing(p.6-5)."
If you print a file in PDF or PS format by specifying its URL on the Remote UI, the print job will always
be spooled, regardless of the settings made under this option.
When you spool a print job on the machine's hard disk, the time required to release a computer outputting
a print job is shortened.
Communication Environment Setup
2
2-19