Canon iR3245 Network Manual page 173

4 Computer Settings for a File Server (See " Setting Up a Computer as a File
Server (p.4-20) .")
Specify the settings of the computer receiving data sent from the machine. (Optional equipment is
required to send data. For the equipment needed, see "Optional Equipment and System
Requirements(p.1-2).")
Remark
You can specify the NetWare protocol settings if you
are using the iR3245N/iR3235N/iR3225N, or the
iR3245/iR3235/iR3225 with the optional UFR II Printer
Kit, the optional UFR II/PCL Printer Kit, the optional PS
Printer Kit, the optional Super G3 FAX Board, or the
optional Color Universal Send Kit.
It is recommended that steps 1, 2, and 4 above be
performed by the network administrator.
To configure settings with software other than the
control panel of the machine, NWADMIN,
PCONSOLE, or NetSpot Device Installer, TCP/IPv4
protocol must be supported by your network
environment (IPv6 is not supported).
NetWare Network Setup Procedures
4
4-3