Startup Time Settings - Canon iR3245 Network Manual

Startup Time Settings

If you connect the machine to a switching hub, it may not be able to connect to a network even though
3
your network settings are set correctly.
This occurs because the spanning tree process performed between switching hubs prevents them
from communicating with each other immediately after the machine connects to a switching hub.
In this case, use the following procedure to delay the start of communication.
1. On the Network Settings screen, press [Startup Time Settings] → specify
the following.
Press [-] or [+] to set the time period to delay the startup of network communications for the
machine.
3-78 Startup Time Settings