Canon iR3245 Network Manual page 43

If you want to specify a Community Name 2
Press [Community Name 2 Settings] → [On] → specify the settings for <MIB
Access Permission> and the community name in [Community Name].
You can also change the community name in [Community Name] to a name other than
'public2'.
2. Specify the settings for SNMP v. 3.
[On] for <Use SNMP v. 3>: Specify the user and context according to the following
procedures.
An SNMP v. 3 user with the following settings is registered by default. Delete or change these settings as
necessary.
User: initial
MIB Access Permission: Read/Write
Security Settings: Auth Yes/Encrypt Yes
Authent. Algorithm: MD5
Authent. Password: initial
Encryption Password: initial
If you want to add an SNMP v. 3 user:
●
If you want to confirm or change the SNMP v. 3 user settings:
●
If you want to erase an SNMP v. 3 user:
●
If you want to change the status of an SNMP v. 3 user:
●
If you want to edit the context:
●
Communication Environment Setup
2
2-15