Canon iR3245 Network Manual page 95

Select the key pair for the server certificate you want to confirm → press
[Certificate Details] → [Certificate Verification].
If [Certificate Verification] is grayed out or <The key is corrupted or invalid.> is displayed, you
cannot use the key pair. After erasing the corrupted or invalid key pair, register a key pair
(see "Generating a Key Pair and Server Certificate(p.3-38)," or "Registering a Key Pair File
and Server Certificate File Installed from a Computer(p.3-41).").
If you want to erase a registered key pair:
Select the key pair to erase → press [Erase].
Key pairs for which 'Using' is displayed in <Used> cannot be deleted because they are being used with the
IEEE802.1X authentication/IPSec or because SSL is set to 'On'. Press [Display Use Location] to check the
type of security the key pair is being used for. To delete a key pair which is only being used with SSL, set
the following settings to 'Off'. A key pair being used for the IEEE802.1X authentication/IPSec cannot be
deleted.
[Remote UI] (See the Remote UI Guide)
[Use HTTP] in [MEAP Settings] (See the MEAP SMS Administrator Guide)
[IPP Print Settings] (See step 7 of "Settings Common to TCP/IPv4 and TCP/IPv6(p.3-23).")
Editing Key Pairs and Server Certificates
3
3-43