Canon iR3245 Network Manual page 238

Unable to Print from an AppleTalk Network
Cause 1
Remedy
Cause 2
Remedy
Cause 3
7
Remedy
Cause 4
Remedy
7-10 Printing Problems and Remedies
The machine and cable are not properly connected.
Turn OFF the machine's power switches, check that the machine is
connected to the network using the proper cable, and then turn them
ON. (See "Connecting the Machine to a Computer or Network(p.2-3).")
The AppleTalk network is not properly set up.
Confirm the AppleTalk settings. In particular, check the following:
Set the [Phase] to a valid phase type.
Set the [Zone] to the zone to which the printer belongs.
Your computer may not be able to recognize the machine even though the IP address
settings are appropriate. This problem may be resolved by delaying the startup of
network communications for the machine. (See "Startup Time Settings(p.3-78).")
The computer that is printing is not properly set up.
Check the following Macintosh settings:
Confirm that the proper printer driver is installed.
Confirm that the proper printer has been selected as the destination.
Confirm that [AppleTalk] is active.
Confirm that the AppleTalk connection method is EtherTalk or Ethernet.
An error message is displayed on the touch panel display of the
machine.
After confirming the error message, perform the necessary operations
according to the error message displayed.