Canon iR3245 Network Manual page 57

2. In <Use IPv4>, specify the following.
[On] for <Use IPv4>: IPv4 networks can be used.
[Off] for <Use IPv4>: IPv4 networks cannot be used, regardless of the settings specified for
IPv4 on the Additional Functions screen. The ARP (Address Resolution Protocol) table is
also disabled.
If you set <Use IPv4> to 'Off', you cannot use a NetBIOS network.
3. On the TCP/IPv4 Settings screen, press [IP Address Settings] → specify
the following.
Using a fixed IP address:
●
TCP/IPv4 Settings 3-5
3