6. On the TCP/IP Settings screen, press [Use PASV Mode for FTP] →
specify the following.
3
Set the PASV mode for FTP if you are using the optional Color Universal Send Kit.
Whether you use the PASV mode for FTP depends on the network environment you are using and the
settings of the file server you are sending to. Before specifying the PASV mode for FTP, consult your
network administrator.
7. On the TCP/IP Settings screen, press [IPP Print Settings] → specify
thefollowing.
Specify the IPP print settings if you are using the iR3245N/iR3235N/iR3225N, or the iR3245/
3-28
Settings Common to TCP/IPv4 and TCP/IPv6