Canon iR3245 Network Manual page 200

If you want the machine to notify the LAN Manager of its existence on the network, press
[On] for <LM Announce>. If the LAN Manager does not have to refer to the machine, you can
control the traffic over your network by selecting [Off].
To set up an SMB printer, press [SMB Printer Settings] → [On] for <Use SMB> → enter
the printer name of the machine in [Printer].
You cannot enter the domain name as the workgroup name.
You cannot enter a character string that includes blanks in [Server] and [Workgroup].
Optional equipment is required to print or send a fax from a computer. For the equipment needed, see
"Optional Equipment and System Requirements(p.1-2)."
You cannot enter a character string including blanks in [Printer].
5
2. On the TCP/IP Settings screen, press [WINS Configuration] → specify
the following.
[On] for <WINS Resolution>: You can resolve the name with WINS. Enter the IPv4 address
of a WINS server in [WINS Server Address].
Enter the [Scope ID] settings if a scope ID is set on the computer in the network environment
you are using. The scope ID is an identifier for determining the range available to a printer or
computer. The scope ID set here is used regardless of the setting for <WINS Resolution>.
If DHCP determines the IPv4 address, the IPv4 address obtained from a DHCP server isoverwritten with
the IPv4 address of a WINS server (obtained from the DHCP server), wheneverpossible.
If you set a scope ID, the machine cannot communicate with any computer whose scope ID is different
from the scope ID you set here.
If a scope ID is not set on any of the computers in your network environment, leave [Scope ID] blank.
5-6 SMB and WINS Settings