Startup Time Settings - Canon MF7280 - ImageCLASS B/W Laser Network Manual

Startup Time Settings

If you connect the machine to a switching hub, it may not be able to connect to a
network even though your network settings are set correctly.
This occurs because the spanning tree process performed between switching hubs
prevents them from communicating with each other immediately after the machine
connects to a switching hub.
In this case, use the following procedure to delay the start of communication.
1
3
2
3-22
Protocol Settings
(Additional Functions) ➞ [System Settings] ➞
Press
[Network Settings].
Press [▼] or [▲] until [Startup Time Settings] appears ➞ press
[Startup Time Settings].