Startup Time Settings - Canon imageRunner 6570 Network Manual

The e-mail/I-fax settings are complete.

Startup Time Settings

If you connect the machine to a switching hub, it may not be able to connect to a
network even though your network settings are set correctly.
3
This occurs because the spanning tree process performed between switching hubs
prevents them from communicating with each other immediately after the machine
connects to a switching hub.
In this case, use the following procedure to delay the start of communication.
1
2
3-50
Protocol Settings
NOTE
For instructions on how to turn ON/OFF the machine, see Chapter 1, "Before You
Start Using This Machine," in the Reference Guide.
(Additional Functions) ➞ [System Settings] ➞
Press
[Network Settings].
Press [▼] or [▲] until [Startup Time Settings] appears ➞ press
[Startup Time Settings].