ZyWALL 50 Internet Security Gateway
Table 26-6 Troubleshooting Remote Management
PROBLEM
Cannot access the ZyWALL
from the LAN or WAN.
26-4
CORRECTIVE ACTION
Refer to the Remote Management Limitations section for scenarios when
remote management may not be possible.
When NAT is enabled:
Use the ZyWALL's WAN IP address when configuring from the WAN.
Use the ZyWALL's LAN IP address when configuring from the LAN.
Refer to the Problems with the LAN Interface section for instructions on
checking your LAN connection.
Refer to the Problems with the WAN Interface section for instructions on
checking your WAN connection
Troubleshooting