Unix Syslog; Figure 17-8 Menu 24.3.2 - System Maintenance - Unix Syslog; Table 17-3 System Maintenance Menu Syslog Parameters - ZyXEL Communications ZyXEL ZyWALL 50 User Manual

17.3.2 UNIX Syslog

The ZyWALL uses the UNIX syslog facility to log the CDR (Call Detail Record) and system messages to
a syslog server. Syslog and accounting can be configured in Menu 24.3.2 - System Maintenance - Syslog
and Accounting, as shown next.
Figure 17-8 Menu 24.3.2 — System Maintenance — UNIX Syslog
You need to configure the UNIX syslog parameters described in the following table to activate syslog then
choose what you want to log.

Table 17-3 System Maintenance Menu Syslog Parameters

PARAMETER
UNIX Syslog:
Active Press [SPACE BAR] to turn syslog on or off.
Syslog IP Address Enter the IP Address of the server that will log the CDR (Call Detail Record) and
system messages i.e., the syslog server.
Log Facility Press [SPACE BAR] to select a Local option. The log facility allows you to log the
message to different files in the server. Please refer to your UNIX manual for more
details.
Types:
Call Detail Record (CDR) logs all data phone line activity if set to Yes.
CDR
Packet triggered The first 48 bytes or octets and protocol type of the triggering packet is sent to the
UNIX syslog server when this field is set to Yes.
System Information & Diagnosis
Menu 24.3.2 - System Maintenance - UNIX Syslog and Accounting
Syslog:
Active= No
Syslog IP Address= ?
Log Facility= Local 1
Types:
CDR= No
Packet Triggered= No
Filter log= No
PPP log= No
Firewall log= No
Press ENTER to Confirm or ESC to Cancel
ZyWALL 50 Internet Security Gateway
DESCRIPTION
17-7