Example Xmodem Firmware Upload Using Hyperterminal; Figure 18-16 Menu 24.7.1 As Seen Using The Console Port; Figure 18-17 Example Xmodem Upload - ZyXEL Communications ZyXEL ZyWALL 50 User Manual

Menu 24.7.1 - System Maintenance - Upload System Firmware
To upload System firmware:
1. Enter "y" at the prompt below to go into debug mode.
2. Enter "atur" after "Enter Debug Mode" message.
3. Wait for "Starting XMODEM upload" message before activating
Xmodem upload on your terminal.
4. After successful firmware upload, enter "atgo" to restart the
router.
Warning: Proceeding with the upload will erase the current router
firmware.

Figure 18-16 Menu 24.7.1 as seen using the Console Port

Step 2. After the "Starting Xmodem upload" message appears, activate the Xmodem protocol on your
computer. Follow the procedure as shown previously for the HyperTerminal program. The
procedure for other serial communications programs should be similar.

18.4.9 Example Xmodem Firmware Upload Using HyperTerminal

Click Transfer, then Send File to display the following screen.
After the firmware upload process has completed, the ZyWALL will automatically restart.
Firmware and Configuration File Maintenance
Do You Wish To Proceed:(Y/N)

Figure 18-17 Example Xmodem Upload

ZyWALL 50 Internet Security Gateway
Type the firmware file's
location, or click Browse to
look for it.
Choose the Xmodem protocol.
Then click Send.
18-15