Main Menu; System Management Terminal Interface Summary; Figure 3-3 Zywall Main Menu; Table 3-2 Main Menu Summary - ZyXEL Communications ZyXEL ZyWALL 50 User Manual

3.2.1 Main Menu

After you enter the password, the SMT displays the ZyWALL Main Menu, as shown next.
Getting Started
Advanced Applications

3.2.2 System Management Terminal Interface Summary

NO. MENU TITLE
1 General Setup
2 WAN Setup
3 LAN Setup
4 Internet Access Setup
11 Remote Node Setup
12 Static Routing Setup
15 NAT Setup
21 Filter and Firewall Setup
22 SNMP Configuration
Initial Setup
Copyright (c) 1994 - 2001 ZyXEL Communications Corp.
ZyWALL Main Menu
1. General Setup
2. WAN Setup
3. LAN Setup
4. Internet Access Setup
11. Remote Node Setup
12. Static Routing Setup
15. NAT Setup
Enter Menu Selection Number:

Figure 3-3 ZyWALL Main Menu

Table 3-2 Main Menu Summary

Use this menu to set up administrative information and dynamic DNS.
Use this menu to clone a MAC address from a computer on your LAN.
Use this menu to configure LAN DHCP and TCP/IP settings as well as
apply LAN filters.
Configure your Internet Access setup (Internet address, gateway, login,
etc.) with this menu.
Use this menu to configure detailed remote node settings (your ISP is
also a remote node) as well as apply WAN filters.
Configure IP static routes in this menu.
Use this menu to configure Network Address Translation.
Configure filters, activate/deactivate the firewall and view the firewall log.
Use this menu to configure SNMP-related parameters.
ZyWALL 50 Internet Security Gateway
Advanced Management
21. Filter and Firewall Setup
22. SNMP Configuration
23. System Password
24. System Maintenance
26. Schedule Setup
27. VPN/IPSec Setup
99. Exit
FUNCTION
3-3