Step 2.
The following screen indicates that the Xmodem download has started.
You can enter ctrl-x to terminate operation any time.
Starting XMODEM download...
Figure 18-4 System Maintenance — Starting Xmodem Download Screen
Step 3.
Run the HyperTerminal program by clicking Transfer, then Receive File as shown in the
following screen.
Step 4.
After a successful backup you will see the following screen. Press any key to return to the SMT
menu.
Figure 18-6 Successful Backup Confirmation Screen
18.3 Restore Configuration
This section shows you how to restore a previously saved configuration. Note that this function erases the
current configuration before restoring a previous back up configuration; please do not attempt to restore
unless you have a backup configuration file stored on disk.
Firmware and Configuration File Maintenance
Figure 18-5 Backup Configuration Example
** Backup Configuration completed. OK.
### Hit any key to continue.###
ZyWALL 50 Internet Security Gateway
Type a location for
storing the configuration
file or click Browse to
Choose the Xmodem
protocol
Then click Receive.
18-7