Configuring A Filter Set; Figure 15-4 Menu 21 - Filter And Firewall Setup; Figure 15-5 Menu 21.1 - Filter Set Configuration - ZyXEL Communications ZyXEL ZyWALL 50 User Manual

ZyWALL 50 Internet Security Gateway
You can apply up to four filter sets to a particular port to block multiple types of packets. With each filter
set having up to six rules, you can have a maximum of 24 rules active for a single port.

15.2 Configuring a Filter Set

To configure a filter set, follow the procedure below. For more information on menus 21.2 and 21.3, please
see the firewall chapters.
Step 1.
Select option 21. Filter Set Configuration from the main menu to open menu 21.
Figure 15-4 Menu 21 — Filter and Firewall Setup
Step 2.
Enter 1 to bring up the following menu.
Filter
Set #
------
Figure 15-5 Menu 21.1 — Filter Set Configuration
15-4
Menu 21 - Filter and Firewall Setup
1. Filter Setup
2. Firewall Setup
3. View Firewall Log
Menu 21.1 - Filter Set Configuration
Comments
-----------------
1 NetBIOS_WAN
2 NetBIOS_LAN
3 _______________
4 _______________
5 _______________
6 _______________
Enter Filter Set Number to Configure= 0
Edit Comments= N/A
Press ENTER to Confirm or ESC to Cancel:
Enter Menu Selection Number:
Filter
Set # Comments
------ -----------------
7 _______________
8 _______________
9 _______________
10 _______________
11 _______________
12 _______________
Filter Configuration