Time And Date Setting; Figure 19-6 Menu 24 - System Maintenance - ZyXEL Communications ZyXEL ZyWALL 50 User Manual

19.3 Time and Date Setting

The ZyWALL has a Real Time Chip (RTC) that keeps track of the time and date. There is also a software
mechanism to set the time manually or get the current time and date from an external server when you turn
on your ZyWALL. Menu 24.10 allows you to update the time and date settings of your ZyWALL. The real
time is then displayed in the ZyWALL error logs and firewall logs.
Select menu 24 in the main menu to open Menu 24 - System Maintenance, as shown next.
Enter Menu Selection Number:
Then enter 10 to go to Menu 24.10 - System Maintenance - Time and Date Setting to update the time
and date settings of your ZyWALL as shown in the following screen.
System Maintenance & Information
Menu 24 - System Maintenance
1. System Status
2. System Information and Console Port Speed
3. Log and Trace
4. Diagnostic
5. Backup Configuration
6. Restore Configuration
7. Upload Firmware
8. Command Interpreter Mode
9. Call Control
10. Time and Date Setting
11. Remote Management Setup
Figure 19-6 Menu 24 — System Maintenance
ZyWALL 50 Internet Security Gateway
19-5