Chapter 21 Call Scheduling; Figure 21-1 Menu 26 - Schedule Setup - ZyXEL Communications ZyXEL ZyWALL 50 User Manual

Call scheduling allows you to dictate when a remote node should be called and for how long.
21.1 Introduction
The call scheduling feature allows the ZyWALL to manage a remote node and dictate when a remote node
should be called and for how long. This feature is to the scheduler in a video cassette recorder (you can
record programs you want during a time that is specified by you). You can apply up to 4 schedule sets in
Menu 11.1 - Remote Node Profile. From the main menu, enter 26 to access Menu 26 - Schedule Setup
as shown next.
Schedule
Set #
------
1
2
3
4
5
6
Lower numbered sets take precedence over higher numbered sets thereby avoiding scheduling conflicts. For
example, if sets 1, 2 ,3 and 4 in are applied in the remote node then set 1 will take precedence over set 2, 3
and 4 as the ZyWALL, by default, applies the lowest numbered set first. Set 2 will take precedence over set
3 and 4, and so on.
Call Scheduling
Menu 26 - Schedule Setup
Schedule
Name Set #
------------------ ------
______________ 7
______________ 8
______________ 9
______________ 10
______________ 11
______________ 12
Enter Schedule Set Number to Configure=
Edit Name=
Press ENTER to Confirm or ESC to Cancel:

Figure 21-1 Menu 26 - Schedule Setup

ZyWALL 50 Internet Security Gateway
Chapter 21
Call Scheduling
Name
----------------
--
______________
______________
______________
______________
______________
______________
21-1