Table 16-3 Snmp Traps - ZyXEL Communications ZyXEL ZyWALL 50 User Manual

TRAP # TRAP NAME
0 coldStart (defined in RFC-1215)
1 warmStart (defined in RFC-1215)
4 authenticationFailure (defined in
RFC-1215)
6 whyReboot (defined in ZYXEL-
MIB)
6a For intentional reboot :
6b For fatal error :
SNMP
ZyWALL 50 Internet Security Gateway

Table 16-3 SNMP Traps

A trap is sent after booting (power on).
A trap is sent after booting (software reboot).
A trap is sent to the manager when receiving any SNMP
get or set requirements with wrong community
(password).
A trap is sent with the reason of restart before rebooting
when the system is going to restart (warmstart).
A trap is sent with the message "System reboot by user!"
if reboot is done intentionally, (e.g. download new files,
CI command "sys reboot", etc.).
A trap is sent with the message of the fatal code if the
system reboots because of fatal errors.
DESCRIPTION
16-5